beautypg.com

13 at+fdt data transmission, At+fdt – Siemens Brodersen MC55 AT User Manual

Page 315

background image

MC55_ATC_V04.00

Page 315 of 475

3/17/06

Confidential / Released

12.13

AT+FDT Data Transmission

This command requests the ME to transmit a Phase C page. When the ME is ready to accept Phase C data, it

issues the negotiation responses and the CONNECT result code to the application.

In Phase B, the

AT+FDT

command releases the ME to proceed with negotiation, and releases the DCS message

to the remote station. In Phase C, the

AT+FDT

command resumes transmission after the end of a data stream

transmitted before.

Syntax

Note

• Used for Fax Class 2 only.

Exec Command

AT+FDT

Response(s)

CONNECT

Write Command

AT+FDT=

,

,

,

Response(s)

CONNECT

Reference(s)

PIN

ASC0 ASC1

MUX1

MUX2

MUX3 Charge

Last

EIA PN-2388

!

%

!

%

!

!

!

!

!