Iate, Mode, S an – Siemens Brodersen MC55 AT User Manual
Page 164: Format, Oper, Opstatus, Umeric
MC55_ATC_V04.00
Page 164 of 475
3/17/06
Confidential / Released
Parameter Description
Status
0
Unknown
1
Operator available
2
Current operator
3
Operator forbidden
Operator
If test command: Operator name in long alphanumeric format and numeric format.
If read command: Operator name as per
.
If write command: Operator name in numeric format.
Parameter values 0 and 1 are stored non-volatile in the MC55.
0
(D)
Automatic mode;
field is ignored.
1
Manual operator selection
Write command requires
in numeric format, i.e.
shall be 2.
Read command returns the current
and the currently selected
. If no operator is selected,
are omitted.
2
Manually deregister from network and remain unregistered until
=0 or
1 or 4 is selected.
3
Set only
read command).
4
Automatic / manual selection; if manual selection fails, automatic mode
field will be present).
0
(&F)
Long alphanumeric format of
. Can be up to 16 characters long.
2
Numeric format of
. This is the GSM Location Area Identification (LAI)
number, which consists of the 3-digit Mobile Country Code (MCC) plus the 2-
or 3-digit Mobile Network Code (MNC).
Write Command
AT+COPS=
Response(s)
OK
ERROR
Reference(s)
PIN
ASC0 ASC1
MUX1
MUX2
MUX3 Charge
Last
GSM 07.07
§
%
%
%
%
%
!
!
!
(num)
(str)
(num)(&V)
(num)(&W)(&V)