Siemens Brodersen MC55 AT - Manual (Page 262)

MC55_ATC_V04.00 Page 262 of 475 3/17/06
Confidential / Released
10.11.11 Configuring POP3 Service Profile
First set up a connection profile as explained in Section 10.1.1 or Section 10.1.2 . Enter at least all parameters
which are mandatory for a GPRS profile. The example uses the connection profile ID 1 and the service profile
ID 1. The service profile is set up to retrieve a specific email (email number 2).
10.11.12 Retrieving Email (URC Mode)
This example uses the service profile described in Section 10.11.11 .
at^sisc=9
Close the service.
OK
at^siss=1,srvType,"Pop3"
Select service type POP3.
OK
at^siss=1,conId,"1"
Select connection profile 1.
OK
at^siss=1,address,"192.168.1.2"
Specify POP3 server address.
OK
at^siss=1,user,"subscriber1"
Specify recipient's mailbox name.
OK
at^siss=1,passwd,"subscr1"
Password used by recipient for authentication to
POP3 server.
OK
at^siss=1,pCmd,"3"
Command used to retrieve emails.
OK
at^siss=1,pNumber,"2"
Email message number 2 shall be retrieved.
OK
at^siss?
To check the profile enter the
AT^SISS
read com-
mand. The response includes the values of all 10
connection profiles. Service profile 1 contains the
values specified above and the values automatically
assumed by default.
^SISS: 0, "srvType", ""
^SISS: 1, "srvType", "Pop3"
^SISS: 1, "conId", "1"
^SISS: 1, "alphabet", "0"
Default: Character set enabled with
AT+CSCS
shall
be used.
^SISS: 1, "address", "192.168.1.2"
^SISS: 1, "user", "subscriber1"
^SISS: 1, "passwd", "*******"
^SISS: 1, "pCmd", "3"
^SISS: 1, "tcPort", "110"
Default: TCP port number commonly used for POP3.
^SISS: 1, "pNumber", "2"
^SISS: 1, "pLength", "0"
Default: Message size shall not be limited.
^SISS: 1, "pDelFlag", "0"
Default: Retrieved message shall not be deleted on
POP3 server.
^SISS: 1, "tcpMR", "10"
Default: Number of retransmission attempts for TCP
packets is 10 (= default of
AT^SCFG
).
^SISS: 1, "tcpOT", "6000"
Default: Timeout before closing outstanding TCP
connection is 6000 sec (= default of
AT^SCFG
).
^SISS: 2, "srvType", ""
^SISS: 3, "srvType", ""
^SISS: 4, "srvType", ""
^SISS: 6, "srvType", ""
^SISS: 7, "srvType", ""
^SISS: 8, "srvType", ""
^SISS: 9, "srvType", ""
OK