Siemens Brodersen MC55 AT User Manual
Page 292
MC55_ATC_V04.00
Page 292 of 475
3/17/06
Confidential / Released
11.14
AT^SGCONF Configuration of GPRS related Parameters
Syntax
Parameter Description
The maximum number of octets in an information field of Unnumbered (U) frames.
0
No negotiation with network (500 will be used).
140...1520
(P)
Lower values diminish performance.
GPRS Multislot Class. The value can be one of the classes indicated with the Test command. The value set is
volatile and powerup value is the maximum allowed.
Notes
• +CME ERROR: invalid index: Parameter is out of range
• +CME ERROR: operation temporary not allowed: The command is blocked as long as GPRS is already in
use (as long as mobile is GPRS attached).
• Writing to user profile with
and restoring with
are not supported.
Test Command
AT^SGCONF=?
Response(s)
^SGCONF:
s), (list of supported
es)
OK
Read Command
AT^SGCONF?
Response(s)
OK
Write Command
AT^SGCONF=
[
][, [
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
PIN
ASC0 ASC1
MUX1
MUX2
MUX3 Charge
Last
SIEMENS
!
%
%
%
%
%
!
!
!
(num)
(num)