Siemens Brodersen MC55 AT - Manual (Page 365)

MC55_ATC_V04.00 Page 365 of 475 3/17/06
Confidential / Released
13.22 AT^SSCONF SMS Command Configuration
AT^SSCONF
controls details of some SMS releated commands. Please note that
AT^SSCONF
settings are stored
volatile, i.e. after restart or reset the default values will be restored.
Syntax
Parameter Description
Display recipient address
[0]
(&F) MC55 does not display and . These parameters are used with
the result codes of
AT+CMGL
,
AT^SMGL
,
AT+CMGR
,
AT^SMGR
and the URC
"
+CDS
".
1 MC55 displays and .
Test Command
AT^SSCONF=?
Response(s)
^SSCONF:
list of supported s
OK
Read Command
AT^SSCONF?
Response(s)
^SSCONF:
OK
Write Command
AT^SSCONF=
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
! % % % % % ! ! !
(num)