Siemens Brodersen MC55 AT - Manual (Page 328)

MC55_ATC_V04.00 Page 328 of 475 3/17/06
Confidential / Released
12.26 AT+FTM Transmit Data
The
AT+FTM
command causes the TA to transmit data, using one of the modulation schemes defined in Section
12.1 , FAX parameters .
An ERROR response code results if the write command is issued while the modem is on-hook. The test com-
mand can be used in on-hook or off-hook mode to check the modulation schemes supported by MC55.
Syntax
Notes
• Used for Fax Class 1 only.
•
= 3 is not possible
Test Command
AT+FTM=?
Response(s)
(list of s)
OK
Write Command
AT+FTM=
Response(s)
CONNECT
If error is related to ME functionality:
ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
TIA/EIA-578 ! % ! % ! ! ! ! !