Siemens Brodersen MC55 AT - Manual (Page 411)

MC55_ATC_V04.00 Page 411 of 475 3/17/06
Confidential / Released
17.10 AT^SNFD Set audio parameters to manufacturer default values
AT^SNFD
sets the active audio parameters to manufacturer defined default values.
The restored values are:
AT^SNFA
:
AT^SNFI
: ,
AT^SNFO
: , [0 to 4],
AT^SAIC
: , ,
AT^SNFS
:
Syntax
Note
• Remember that the factory set audio mode 1 is fixed to =4. Consequently,
AT^SNFD
restores
together with =4, but does not affect the values of currently selected in
audio modes 2 - 6. This means, if =1, the read commands
AT^SNFO
,
AT^SNFV
and
AT+CLVL
will
always deliver =4. In all other modes the value is retained until explicitly changed.
Test Command
AT^SNFD=?
Response(s)
OK
Exec Command
AT^SNFD
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
SIEMENS ! % % % % % ! ! !