3 at^siss internet service setup profile, Table 10.2, Applicability of – Siemens Brodersen MC55 AT User Manual
Page 228: D with, At^siss, With, T created with, Comma
MC55_ATC_V04.00
Page 228 of 475
3/17/06
Confidential / Released
10.3
AT^SISS Internet Service Setup Profile
serves to set up the necessary parameters in the Internet service profiles. Any service profile can then
be used to control a data link in conjunction with
,
,
,
and
The
read command requests the current settings of all Internet service profiles. One line is issued for
every possible parameter of a given
"srvType" value.
The
write command specifies the parameters for a service profile identified by
. At
first the type of Internet service needs to be selected via
value "srvType". This determines the
applicability of all other
values related to this "srvType" and sets their defaults. Changing the
"srvType" of an existing service profile will reset all
new "srvType". An exception is the
which can be set before or after selecting
"srvType" and is not reset when "srvType" changes.
To change the settings the write command needs to be executed for each single
parameters set with
are volatile.
The list below shows which
parameters apply to each Internet service and which of them are
mandatory or optional.
Table 10.2: Applicability of
values
Mandatory or optional
Socket service
"srvType"
mandatory
"conId"
mandatory
"alphabet"
optional
"address"
mandatory
"tcpMR"
optional
"tcpOT"
optional
FTP service
"srvType"
mandatory
"conId"
mandatory
"alphabet"
optional
"address"
mandatory
"tcpMR"
optional
"tcpOT"
optional
HTTP service
"srvType"
mandatory
"conId"
mandatory
"alphabet"
optional
"address"
mandatory
"user"
optional
"password"
optional
"hcContent"
optional
"hcContLen"
optional