Siemens Brodersen MC55 AT - Manual (Page 475)

MC55_ATC_V04.00 Page 475 of 475 3/17/06
Confidential / Released
ATD*99#
Request GPRS service Section 11.16 , page 294
ATD>
Mobile originated call using specific memory and index
number
Section 7.4 , page 130
ATD>
Mobile originated call from active memory using index
number
Section 7.5 , page 132
ATD>
Mobile originated call from active memory using corre-
sponding field
Section 7.6 , page 133
ATDI
Mobile originated call to ISDN number Section 7.7 , page 134
ATDL
Redial last number used Section 7.8 , page 135
ATE
Enable command echo Section 4.5 , page 89
ATH
Disconnect existing connection Section 7.9 , page 136
ATH
Manual rejection of a network request for PDP context
activation
Section 11.18 , page 296
ATI
Display product identification information Section 6.1 , page 120
ATL
Set monitor speaker loudness Section 17.2 , page 402
ATM
Set monitor speaker mode Section 17.3 , page 402
ATO
Switch from command mode to data mode / PPP online
mode
Section 7.16 , page 143
ATP
Select pulse dialing Section 7.28 , page 161
ATQ
Set result code presentation mode Section 2.4 , page 33
ATS0
Set number of rings before automatically answering a call Section 7.11 , page 138
ATS0
Automatic response to a network request for PDP context
activation
Section 11.19 , page 297
ATS10
Set disconnect delay after indicating the absence of data
carrier
Section 7.15 , page 142
ATS18
Extended call release report Section 3.5 , page 81
ATS3
Set command line termination character Section 19.2 , page 440
ATS4
Set response formatting character Section 19.3 , page 441
ATS5
Write command line editing character Section 19.4 , page 442
ATS6
Set pause before blind dialing Section 7.12 , page 139
ATS7
Set number of seconds to wait for connection completion Section 7.13 , page 140
ATS8
Set number of seconds to wait for comma dialing modifier Section 7.14 , page 141
ATT
Select tone dialing Section 7.29 , page 161
ATV
Set result code format mode Section 2.5 , page 34
ATX
Set CONNECT result code format and call monitoring Section 2.6 , page 35
ATZ
Set all current parameters to user defined profile Section 2.7 , page 36
AT Command Description Section and Page