6 at+cpwd change password, At+cpwd change password, At+cpwd – Siemens Brodersen MC55 AT User Manual
Page 115: Chan, With
MC55_ATC_V04.00
Page 115 of 475
3/17/06
Confidential / Released
5.6
AT+CPWD Change Password
allows to define a new password for a password protected
lock function. Each password
is a string of digits, the length of which varies with the associated
. The test command returns a list
of pairs which represent the available facilities and the maximum length of the associated password. See AT
commands
and
for more information on the various lock features.
Specifically the command can be used to
• change PIN1 or PIN2,
• change the password supplied from your provider for the "call barring" supplementary service,
• set individual phone security passwords,
• enter the unblocking key (Master Phone Code) to restore a disabled "PS" password.
To delete a password use the following syntax: at+cpwd=
Syntax
Parameter Description
Phone security locks set by client or factory:
Primarily intended for the client to take safety precautions, passwords "SC" (SIM PIN) and "P2" (SIM PIN2) are
usually predefined, but can be configured individually. The password for lock facility "PS" may also be factory
set.
"SC"
SIM PIN. SIM requests password upon ME power-up and when this lock com-
mand is issued.
If incorrectly entered three times, the SIM PUK is required to perform authen-
tication. Input of the SIM PUK password is possible only with AT command
or
. For further details please refer to Section
if PIN or password authentication fails?
: 4 to 8 digits.
Test Command
AT+CPWD=?
Response(s)
+CPWD:
list of supported (
)
OK
Write Command
AT+CPWD=
Response(s)
New password has been registered for the facility lock function.
OK
If parameter
was not correct:
+CME ERROR 16 (+CME ERROR: incorrect password)
If the password for the selected
has been invalidated due to too many failed attempts:
+CME ERROR ...
If error is related to ME functionality:
+CME ERROR
Reference(s)
PIN
ASC0 ASC1
MUX1
MUX2
MUX3 Charge
Last
GSM 07.07
%
%
%
%
%
%
!
!
!
(str)