Siemens Brodersen MC55 AT - Manual (Page 290)

11.12 AT+CGSMS Select service for MO SMS messages
Syntax
Test Command
MC55_ATC_V04.00 Page 290 of 475 3/17/06
Confidential / Released
Command Description
The test command is used for requesting information on which services and service preferences can be set by
using the
AT+CGSMS
write command
The read command returns the currently selected service or service preference.
The write command is used to specify the service or service preference that the MT will use to send MO SMS
messages. If parameter is not given, the current value remains unchanged.
Parameter Description
A numeric parameter which indicates the service or service preference to be used. Parameter is global for all
interfaces and volatile.
0
GPRS
1 Circuit switched
2 GPRS preferred (use circuit switched SMS transfer if mobile is not GPRS
attached)
3 (&F)(P) Circuit switched preferred (use GPRS if circuit switched is not available)
Note
• Sending SMS via GPRS is only possible when mobile is attached using
AT+CGATT
.
AT+CGSMS=?
Response(s)
+CGSMS:
(list of supported s)
OK
Read Command
AT+CGSMS?
Response(s)
+CGSMS:
OK
Write Command
AT+CGSMS=
[ ]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
GSM 07.07 % % % % % % ! ! !
(num)