Siemens Brodersen MC55 AT - Manual (Page 313)

MC55_ATC_V04.00 Page 313 of 475 3/17/06
Confidential / Released
12.11 AT+FDIS Query or set session parameters
This command allows the controlling application to sense and constrain the capabilities used for the current ses-
sion. It uses
AT+FDIS
to generate DIS or DTC messages directly, and uses
AT+FDIS
and received DIS mes-
sages to generate DCS messages.
Syntax
Note
• Used for Fax Class 2 only.
Test Command
AT+FDIS=?
Response(s)
(list of s), (list of s), (list of s), (list of s), (list of s), (list of s), (list of s),
(list of s)
OK
Read Command
AT+FDIS?
Response(s)
, , , , , , ,
OK
Write Command
AT+FDIS=
, , , , , , ,
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
EIA PN-2388 ! % ! % ! ! ! ! !