Siemens Brodersen MC55 AT - Manual (Page 441)

MC55_ATC_V04.00 Page 441 of 475 3/17/06
Confidential / Released
19.3 ATS4 Set response formatting character
The
ATS4
command determines the character generated by the TA for result code and information text.
Syntax
Parameter Description
response formatting character
000...10
(&F) ...127
Note
• Whenever you change the setting take into account that the new value has no effect on the URC "
^SHUT-
DOWN
".
Read Command
ATS4?
Response(s)
OK
Write Command
ATS4=
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
V.250 ! % % % % % ! ! !
(num)(&W)(&V)