Siemens Brodersen MC55 AT - Manual (Page 305)

MC55_ATC_V04.00 Page 305 of 475 3/17/06
Confidential / Released
12.3 AT+FBADMUL Error Threshold Multiplier
This command defines the "Copy-Quality-OK" multiplier. The number of lines received with a bad pixel count is
multiplied by this number. If the result exceeds the total number of lines on the page the error rate is considered
too high. A threshold multiplier value of 20 corresponds to a 5 per cent error rate. A value of 0 implies that error
checking is not present or disabled.
Syntax
Parameter Description
0...20 (P) ...255
Note
• Used for Fax Class 2 only.
Read Command
AT+FBADMUL?
Response(s)
OK
Write Command
AT+FBADMUL=
Response(s)
OK
If error is related to ME functionality:
ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
EIA PN-2388 ! % ! % ! ! ! ! !
(num)