Siemens Brodersen MC55 AT - Manual (Page 33)

MC55_ATC_V04.00 Page 33 of 475 3/17/06
Confidential / Released
2.4 ATQ Set result code presentation mode
This parameter setting determines whether or not the TA transmits any result code to the TE. Information text
transmitted in response is not affected by this setting.
Syntax
Parameter Description
[0] (&F) DCE transmits result code
1 Result codes are suppressed and not transmitted
Exec Command
ATQ
[ ]
Response(s)
If =0:
OK
If
=1:
(none)
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
V.250 ! % % % % % ! ! !
(num)(&W)(&V)