beautypg.com

Siemens Brodersen MC55 AT User Manual

Page 36

background image

MC55_ATC_V04.00

Page 36 of 475

3/17/06

Confidential / Released

2.7

ATZ Set all current parameters to user defined profile

ATZ

sets all current parameters to the user profile stored with

AT&W

. If a connection is in progress, it will be ter-

minated.

All defined GPRS contexts which are not activated or not online will be undefined (see

AT+CGDCONT

).

The user defined profile is stored to the non-volatile memory.

Syntax

Parameter Description

[0]

Reset to user profile

Notes

• First the profile will be set to factory default (see

AT&F

). If there is a valid user profile (stored with

AT&W

), this

profile will be loaded afterwards.

• Any additional commands on the same command line may be ignored. A delay of 300 ms is required before

next command is sent, otherwise "OK" response may be corrupted.

Exec Command

ATZ

[

]

Response(s)

OK

Reference(s)

PIN

ASC0 ASC1

MUX1

MUX2

MUX3 Charge

Last

V.250

!

%

%

%

%

%

!

!

!

(num)