2 superscript notation for parameters and values, Superscript notation for parameters and values, Table 1.1 – Siemens Brodersen MC55 AT User Manual
Page 16: Symbols used to mark the type of parameters, Table 1.2, Table 1.3
MC55_ATC_V04.00
Page 16 of 475
3/17/06
Confidential / Released
1.3.2
Superscript notation for parameters and values
Table 1.1: Symbols used to mark the type of parameters
Table 1.2: Symbols used to indicate the correlations with other commands
Table 1.3: Symbols used to mark different types of default values of parameters
Parameter type
Meaning
(num)
Parameter value must be numeric type
(str)
Parameter value must be string type
Parameter option
Meaning
(&W)
Parameter value will be stored with
(&V)
Parameter value will be displayed with
(ˆSNFW)
Parameter value will be stored with
(+CSCS)
Parameter value has to be (is) coded according to current setting of
(see
Value option
Meaning
[x]
Default value: if the parameter is omitted, the value 'x' will be assumed
x
(&F)
Factory default value, will be restored to 'x' with
x
(P)
Powerup default value of a parameter which is not stored at power down
x
(D)
Delivery default value of a parameter which cannot be restored automatically