By the, Conpro, Fileid – Siemens Brodersen MC55 AT User Manual
Page 223: Conprofileid, Conparmtag, Lected via, Valu, Value, All profil, Sics
MC55_ATC_V04.00
Page 223 of 475
3/17/06
Confidential / Released
Parameter Description
0...5
Internet connection profile identifier.
The
identifies all parameters of a connection profile, and,
when a service profile is created with
needs
to be set as "conId" value of the
parameter
.
Internet connection parameter.
"conType"
Type of Internet connection.
.
"alphabet"
Selects the character set for input and output of string parameters within a pro-
file.
The selected value is bound to the specific profile. This means that different
profiles may use different alphabets. Unlike other parameters the alphabet can
be changed no matter whether the
value "conType" has been
set.
For supported values of
refer to
.
"user"
User name string: maximum 32 characters (where "" is default).
"passwd"
Password string: maximum 32 characters (where ***** is default).
"apn"
Access point name string value: maximum 100 characters (where "" is default).
"inactTO"
Inactivity timeout value in seconds: 0 ... 2
16
-1, default = 20
Number of seconds the bearer remains open although the service no longer
needs the bearer connection.
"calledNum"
Called BCD number.
"dataType"
Data call type.
For supported values of
refer to
.
"dns1"
Primary DNS server address (IP address in dotted-four-byte format).
This value determines whether to use the DNS server addresses dynamically
assigned by the network or a specific DNS server address given by the user.
"dns1" = "0.0.0.0" (default) means that the CSD or GPRS connection profile
uses dynamic DNS assignment. Any other address means that the Primary
DNS is manually set.
The default value applies automatically if no other address is set. Note that the
read command only returns a manually configured IP address, while
the value "0.0.0.0" is not indicated at all, no matter whether assumed by default
or explicitly specified.
See also note below.
Write Command
AT^SICS=
Response(s)
OK
ERROR
PIN
ASC0 ASC1
MUX1
MUX2
MUX3 Charge
Last
!
%
%
%
%
%
!
!
!
(num)
(str)