10 at^smong gprs monitor – Siemens Brodersen MC55 AT User Manual
Page 182
MC55_ATC_V04.00
Page 182 of 475
3/17/06
Confidential / Released
8.10
AT^SMONG GPRS Monitor
The
command supplies GPRS specific cell information. There are two ways to retrieve the informa-
tion: once on request by using the execute command or automatically every
seconds by using the
write command. To stop the periodic presentation type "AT" or "at".
Syntax
Parameter Description
1
Cell Info Table
Display period in seconds
If
is omitted the cell data will be presented only once on a single line (as if Execute command was
issued).
is given, the cell data will be listed repeatedly on 10 data lines. Every 10
th
data line is followed by
the header, simply to repeat the column titles.
1...100
Test Command
AT^SMONG=?
Response(s)
^SMONG:
(list of supported