Siemens Brodersen MC55 AT User Manual
Page 153
MC55_ATC_V04.00
Page 153 of 475
3/17/06
Confidential / Released
EXAMPLE 2
^SLCC:
1,0,2,0,0,0,''1234567'',129,''Called
Party''
MO call starts, paging B-party
^SLCC:
End of current list
^SLCC:
1,0,2,0,0,1,''1234567'',129,''Called
Party''
Traffic channel established,
network may now transmit network announcements,
ME may now transmit DTMF tones.
^SLCC:
End of current list
^SLCC:
1,0,3,0,0,1,''1234567'',129,''Called
Party''
Call is now ringing at B-Party
^SLCC:
End of current list
^SLCC:
1,0,0,0,0,1,''1234567'',129,''Called
Party''
B-Party has accepted the call, connection estab-
lished
^SLCC:
End of current list
atd23456;
We start a second voice call.
OK
''OK'' response is issued immediately because
another call is already active (cf.
^SLCC:
1,0,1,0,0,0,''1234567'',129,''Called
Party''
The active call is automatically put on hold, triggering
the display of the list
^SLCC: 2,0,2,0,0,1,"23456",129
The second call has already started before the indi-
cation for the held call could be displayed
^SLCC:
End of current list
^SLCC:
1,0,1,0,0,0,''1234567'',129,''Called
Party''
The identical list is displayed again, triggered by the
start of the second voice call
^SLCC: 2,0,2,0,0,1,"23456",129
The status of the second list entry has already been
displayed with the previous URC
^SLCC:
End of current list
^SLCC:
1,0,1,0,0,0,''1234567'',129,''Called
Party''
The held call doesn't change status right now
^SLCC: 2,0,3,0,0,1,"23456",129
The second call is now alerting the B-Party
^SLCC:
End of current list
^SLCC:
1,0,0,0,0,1,''1234567'',129,''Called
Party''
The held call doesn't change status right now
^SLCC:
End of current list: the B-Party of the second call has
not accepted the call in time, the second call has
ended.
NO CARRIER
The second call has ended
^SLCC:
list is now empty: B-Party has ended the first call
NO CARRIER
The first call has ended
^SLCC: 1,1,4,0,0,1,''1234567'',129
Incoming call is signalled.
Display is triggered by the incoming call, but the cur-
rent status of the call at the time of display already
comprises an active traffic channel.
^SLCC:
End of current list
RING
Incoming call is signalled.
^SLCC: 1,1,4,0,0,1,''1234567'',129
The incoming call had a traffic channel assigned
from the start.
This second identical display is triggered by the traf-
fic channel assignment.
Since the traffic channel was already indicated in the
previous URC, both instances of the URC contain
identical information.