Siemens Brodersen MC55 AT - Manual (Page 217)

MC55_ATC_V04.00 Page 217 of 475 3/17/06
Confidential / Released
9.14 AT+CUSD Supplementary service notifications
AT+CUSD
allows control of the Unstructured Supplementary Service Data (USSD) according to GSM 02.90. Both
network and mobile initiated operations are supported. The interaction of this command with other commands
based on other GSM supplementary services is described in the GSM standard.
Parameter is used to disable/enable the presentation of an unsolicited result code (USSD response from
the network, or network initiated operation) "
+CUSD
: [ [ ]]" to the TE.
When parameter is given, a mobile initiated USSD string or a response USSD string to a network
initiated operation is sent to the network. The response USSD string from the network is returned in a subsequent
unsolicited result code "
+CUSD
"
Syntax
Unsolicited Result Code
+CUSD: [ [ ]]
URC "+CUSD" indicates an USSD response from the network, or network initiated operation
Parameter Description
0 (&F) Disable the result code presentation in the TA
1 Enable the result code presentation in the TA
2 Cancel session (not applicable to read command response)
String type USSD-string (when parameter is not given, network is not interrogated).
For the write command, only = 15 is supported.
Test Command
AT+CUSD=?
Response(s)
+CUSD:
(list of supported s)
OK
Read Command
AT+CUSD?
Response(s)
+CUSD:
OK
Write Command
AT+CUSD=
[, [, ]]
Response(s)
OK
+CME ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
GSM 07.07, GSM 02.90, GSM 03.90,
GSM 04.90
% % % % % % ! ! !
(num)
(str)