Siemens Brodersen MC55 AT - Manual (Page 146)

MC55_ATC_V04.00 Page 146 of 475 3/17/06
Confidential / Released
7.19 AT+CRLP Select radio link protocol parameters for originated
non-transparent data calls
The
AT+CRLP
write command sets radio link protocol (RLP) parameters used when non-transparent data calls
are originated. The read command returns the current settings for the supported RLP version 0.
Syntax
Parameter Description
Interworking window size (IWF to MS)
0...61
(&F)
Mobile window size (MS to IWF)
0...61
(&F)
Acknowledgement timer (T1 in 10 ms units)
48...[78]
(&F) ...255
Re-transmission attempts N2
1...6
(&F) ...255
Test Command
AT+CRLP=?
Response(s)
+CRLP:
(list of supported s), (list of supported s), (list of supported s), (list of
supported s)
OK
Read Command
AT+CRLP?
Response(s)
+CRLP:
, , ,
OK
Write Command
AT+CRLP=
[ [, [, [, ]]]]
Response(s)
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
GSM 07.07 ! % ! % ! ! ! ! !
(num)(&W)(&V)
(num)(&W)(&V)
(num)(&W)(&V)
(num)(&W)(&V)