Siemens Brodersen MC55 AT - Manual (Page 367)

MC55_ATC_V04.00 Page 367 of 475 3/17/06
Confidential / Released
13.24 AT^SSMSS Set Short Message Storage Sequence
The short message storage ''MT'' (see
AT+CPMS
) is a logical storage. It consists of two physical storages ''ME''
and ''SM''. This command allows to select the sequence of addressing this storage.
Syntax
Parameter Description
MT sequence
0
(&F)(P) ''MT'' storage is ''ME'' then ''SM
1 ''MT'' storage is ''SM'' then ''ME''
Note
• Access to the SIM storage is faster. For compatibility with previous software re-leases, the ''MT'' sequence
=0 is the factory default.
Test Command
AT^SSMSS=?
Response(s)
^SSMSS:
(list of supported) s
Read Command
AT^SSMSS?
Response(s)
^SSMSS:
OK
Write Command
AT^SSMSS=
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
SIEMENS ! % % % % % ! ! !
(num)