Siemens Brodersen MC55 AT User Manual

Page 130

MC55_ATC_V04.00

Page 130 of 475

3/17/06

Confidential / Released

7.4

ATD> Mobile originated call using specific memory
and index number

Syntax

Command Description

TA attempts to set up an outgoing call to the specified number. The termination character ";" is mandatory since

dialing from a phonebook is only supported for voice calls and for sending *# codes of Supplementary Services

or other functions.

Parameter Description

Phonebook storage:

For detailed description of storages see

AT+CPBS

"FD"

Fixed dialing phonebook

"SM"

SIM phonebook

"ON"

MSISDN list

"ME"

Mobile Equipment Phonebook

"LD"

Last number dialed phonebook

"MC"

Missed (unanswered received) calls list

"RC"

Received calls list

Integer type memory location in the range of locations available in the selected memory, i.e. the index number

returned by

AT+CPBR

String of GSM modifiers:

I Activates CLIR (disables presentation of own phone number to called party)

i Deactivates CLIR (enables presentation of own phone number to called party)

Exec Command

ATD>

[

];

Response(s)

ERROR

+CME ERROR:
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
When TA returns to command mode after call release:
OK
If successfully connected:
OK

Reference(s)

ASC0 ASC1

MUX1

MUX2

MUX3 Charge

Last

V.250

(str)

(num)

(str)