beautypg.com

1 at^moni responses, At^moni responses – Siemens Brodersen MC55 AT User Manual

Page 178

background image

MC55_ATC_V04.00

Page 178 of 475

3/17/06

Confidential / Released

• To some extent, the cell monitoring command

AT^SMONC

covers the same parameters. The receiving level,

for example, can be queried with both commands. Yet the resulting values may be slightly different, even

though obtained over a time period of a few seconds. This is quite normal and nothing to worry about, as the

cell information is permanently updated.

• For compatibility with earlier products and to support legacy applications, any input character may be used to

stop the output in certain cases (depending on the settings of

AT+IPR

and

AT+CMUX

).

8.8.1

AT^MONI responses

ME is not connected:

a) ME is camping on a cell and registered to the network:

b) ME is camping on a cell but not registered to the network (only emergency call allowed):

c) ME camping on a cell, but searching for a better cell (cell reselection):

d) ME is searching and could not (yet) find a suitable cell:

ME is connected (Call in progress):

Columns for Serving Cell:

Serving Cell I Dedicated channel

chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv PWR dBm Q ChMod

1013 21 -71 001 01 1001 0103 7 7 33 -105 33 I No connection

Serving Cell I Dedicated channel

chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv PWR dBm Q ChMod

1013 21 -71 001 01 1001 0103 7 7 33 -105 33 I Limited Service

Serving Cell I Dedicated channel

chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv PWR dBm Q ChMod

1013 21 -71 001 01 1001 0103 7 7 33 -105 33 I Cell Reselection

Serving Cell I Dedicated channel

chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv PWR dBm Q ChMod

Searching

Serving Cell I Dedicated channel

chann rs dBm MCC MNC LAC cell NCC BCC PWR RXLev C1 I chann TS timAdv PWR dBm Q ChMod

1013 19 -76 001 01 1001 0103 7 7 33 -105 33 I 1015 1 0 5 -76 0 S_HR

Column

Description

chann

ARFCN (Absolute Frequency Channel Number) of the BCCH carrier

rs

RSSI value 0 - 63 (RSSI = Received signal strength indication)

dBm

Receiving level of the BCCH carrier in dBm

MCC

Mobile Country Code (first part of the PLMN code)

MNC

Mobile Network Code (second part of the PLMN code)

LAC

Location area code, see note below

cell

Cell ID

NCC

PLMN colour code

BCC

Base station colour code

PWR

Maximal power level used on RACH channel in dBm