Siemens Brodersen MC55 AT - Manual (Page 304)

MC55_ATC_V04.00 Page 304 of 475 3/17/06
Confidential / Released
12.2 AT+FBADLIN Bad Line Threshold
This command defines the Copy-Quality-OK-threshold. If consecutive lines have pixel count errors
in normal resolution (98 dpi) mode, then the copy quality is unacceptable. If * 2 consecutive lines have
pixel count errors in fine resolution (196 dpi) mode, then the copy quality is unacceptable. "Copy Quality Not OK"
occurs if either the error percentage is too high or too many consecutive lines contain errors. A value of 0 implies
that error checking is not present or disabled.
Syntax
Parameter Description
Bad lines
0...10
(P) ...255
Note
• Used for Fax Class 2 only.
Read Command
AT+FBADLIN?
Response(s)
OK
Write Command
AT+FBADLIN=
Response(s)
OK
If error is related to ME functionality
ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
EIA PN-2388 ! % ! % ! ! ! ! !
(num)