7 at^sisr internet service read data, Sisr, At^sisr – Siemens Brodersen MC55 AT User Manual
Page 245: S, that the, With, E.g. at, Reqreadlength, E.g. at^sisr=9,1
MC55_ATC_V04.00
Page 245 of 475
3/17/06
Confidential / Released
10.7
AT^SISR Internet Service Read Data
The
command either triggers a read operation (download) or queries the number of bytes in the internal
buffer.
The
write command may return the following errors:
•
"+CME ERROR: operation failed"
if there is a problem on application, socket, PPP or GPRS/GSM level. The
command and the "
" URC offer additional error information.
•
"+CME ERROR: operation temporary not allowed"
e.g. if the service has not network resources allocated.
•
"+CME ERROR: operation not allowed"
e.g. if the service is not configured.
Syntax
Unsolicited Result Code
^SISR:
,
Data availability status of the Internet service configured with
has changed. The URC is issued when:
• data is available after opening an Internet service or
• less data was confirmed (in
) than requested (with
) during the last
"Read Data" operation and new data is available.
The URC is disabled in polling mode. See
, parameter "Tcp/WithURCs",
Parameter Description
0 ... 9 specified with
0
Peek Operator: Query number of received bytes within internal buffers.
The behaviour of the peek operator depends on the selected Internet service,
i.e. it may not be supported by all IP Services.
For "Socket" service configured for UDP the size of the next available UDP
packet is returned.
1...1500
Requested number of data bytes to be read via the Internet service specified
in
.
Test Command
AT^SISR=?
Response(s)
OK
Write Command
AT^SISR=
Response(s)
Number of data bytes are sent as specified by
. If peek operator was used no data bytes
are sent.
OK
ERROR
PIN
ASC0 ASC1
MUX1
MUX2
MUX3 Charge
Last
§
%
%
%
%
%
!
!
%
(num)
(num)