Fujitsu Ricoh Fujitsu N7100E Network Image Scanner User Manual
Page 94
4.6 Configuring the Login-Related Settings
94
3. Set [Wait Job].
If you select [No], specify [Number of retries], [Retry interval], and [Show [Resend]].
4. Press the [OK] button.
The information entered is set.
ATTENTION
If you select [No], when the process of sending is not complete, you cannot log out or
turn the power off.
If you select [Yes] for [Show [Resend]], when the send process remains in an error
state, you cannot log out or turn the power off.
HINT
If you select [Yes], the window indicating that the process is in progress appears until
the process of sending a scanned image is complete. In this case, you can scan the
next document as well as perform any other operations in the window after the process
of sending is complete.
If you select [No], you can scan the next document as well as perform any other
operations in the window before the process of sending completes. The process of
sending is temporarily saved and each process is performed in sequence.
You can check the status of the send process in the [In progress] tab on the [Send
Status] window, which is shown by pressing the [Send Status] button in the [Main Menu]
window or the [Job Menu] window.
If you select [Yes] for [Show [Resend]], the [Resend] button is displayed in the [In
progress] tab on the [Send Status] window. Pressing the [Resend] button enables you
to restart the send process that remains in an error state. For details, refer to
Viewing Details on Send Operations That Are In Progress" (page 320)
.