Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 348)

6.5 Replacing Parts
348
6.5.3 Replacing the Roller Set
The Roller Set is made up of the brake roller and the pick roller.
The procedure for replacing each roller is as follows.
1. Turn off the scanner power and wait for at least 15 minutes.
For details, refer to "2.1 Turning the Power On/Off" (page 49) .
2. Unplug the power cable from the AC outlet.
3. Remove any documents from the ADF paper chute.
4. Pull the cover release catch toward you, place your hands at both sides
of the LCD cover, and open the LCD cover.
5. Replace the brake roller.
1. Open the cover of the brake roller.
Hold both ends of the cover of the brake roller, and open it in the direction of
the arrow.
CAUTION
Be careful that the LCD cover does not shut on your fingers.
Cover
Hold both ends of the cover