Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 169)

4.16 Managing the User Data Store and System Settings
169
■ Restoring the User Data Store
The scanner's user data store can be restored from a backed-up user data store file.
1. Select [User Data Store] under [Data Management].
 The [User Data Store] window appears.
2. Press the [Browse] button and select a user data store backup file.
3. Press the [Restore] button.
 An "OK to overwrite?" confirmation message appears.
4. Press the [Yes] button.
 After the user data store is restored, a restore completion message appears.
5. Press the [OK] button.
■ Clearing the User Data Store
1. Select [User Data Store] under [Data Management].
 The [User Data Store] window appears.
2. Press the [Clear] button.
 The delete confirmation window appears.
3. Press the [Yes] button.
 The user data store is cleared.
ATTENTION
 Restoring user data overwrites all user information saved at the time of restoration, and
returns all e-mail address books, fax number list, and scan settings to the time the backup
was taken.
 During user data restoration, do not hold down the power button for 4 seconds or longer. It
may cause the scanner to function abnormally.
ATTENTION
 Clearing the user data store cannot be undone.
 Even if the user data store is cleared, the local accounts are not removed. To remove the
local accounts, use the User Editor. For details about how to edit the local accounts, refer to
"F.7 Editing Local Accounts" (page 444) .
Touch
Panel