Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 51)

2.2 Using the Scanner Buttons
51
2.2 Using the Scanner Buttons
■ Using the Power Button
When the scanner is off or in standby mode, pressing the power button will start the
scanner up and display the [Login] window.
When the scanner is on, pressing the power button will show a message.
(*1): The following operation will start up the scanner from standby mode.
 Touching the touch panel
Depending on the device, if a human interface device such as an external
keyboard is connected to the scanner via USB, any key operations will also
startup the scanner.
The window displayed after restarting varies according to the automatic settings
in the following way:
 If automatic login is enabled, the operation window is displayed.
 If automatic login is disabled, the [Login] window is displayed.
Shutdown
Login
Operating
[Login] Window
Operation Windows
Standby
Message
Press
Press
Press
Blinks (*3)
Off
Lit
(*1)
(*2)
No operation
for a set period
No operation
for a set period