Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 204)

4.18 Setting a Job Sequence
204
■ Cloning a Job Menu
This section describes how to clone a job menu.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Menus] tab.
 The [Job Menus List] window appears.
3. Select the job menu to view.
 The job menu settings are displayed on the [Job Menu Layout] area.
4. Change the job menu name shown in [Job Menu Name] to the job menu
name to be added.
5. Clone the detailed job menu settings.
For the procedure, refer to Step 5 through Step 11 in "Adding a Job Menu" (page
201) .
6. Press the [Register] button.
 A job menu is added to the [Job Menus List] window.
■ Editing a Job Menu
This section describes how to edit a job menu.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Menus] tab.
 The [Job Menus List] window appears.
3. Select the job menu to be edited.
 The job menu settings are displayed on the [Job Menu Layout] area.
4. Edit the detailed job menu settings.
For the procedure, refer to Step 5 through Step 11 in "Adding a Job Menu" (page
201) .
5. Press the [Register] button.
 The details of the job menu are changed.