Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 106)

4.7 Configuring the Network Settings
106
4.7.7 Configuring the SMB 1.0/CIFS Settings
1. Select [SMB 1.0/CIFS] under [Network Settings].
 The [SMB 1.0/CIFS] window appears.
2. Specify whether to enable or disable SMB 1.0/CIFS.
3. Press the [OK] button.
 The restart confirmation window appears.
4. Press the [OK] button.
 The scanner is restarted.
Touch
Panel
HINT
 If you want to use the network folder or network printer in which SMB 1.0/CIFS is required for
the connection, enable SMB 1.0/CIFS.
 If SMB 1.0/CIFS is disabled, the network tree may not be displayed when registering a
network folder by selecting a folder in the network tree or when registering a network printer
by selecting a printer in the network tree.
 The connection with the scanner is lost if the setting for SMB 1.0/CIFS is changed via the
Admin Tool. To continue with other settings, wait a short time for the scanner to restart, then
access the scanner via the Admin Tool again.