Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 105)

4.7 Configuring the Network Settings
105
4.7.6 Configuring the SNMP Settings
Set whether or not to obtain the MIB information or enable the trap notification.
For details about configuring the SNMP settings, refer to
"SNMP Settings" (page 423) .
1. Select [SNMP Settings] under [Network Settings].
 The [SNMP Settings] window appears.
2. Specify each item.
3. To check whether trap notification is properly sent, press the [Test]
button.
 Trap notification is performed.
4. Press the [OK] button.
Touch
Panel
Central Admin
Console