Fujitsu Ricoh Fujitsu N7100E Network Image Scanner User Manual
Page 308
5.9 Enabling/Disabling the Scan Viewer
308
When assisted scan starts, a document is
scanned again and the previous image is
replaced with the newly edited image.
Press the [Send] button on the [Scan
Viewer] window.
The scanned data is sent as an e-mail attachment.
ATTENTION
Even if [Scan Viewer] is set to [Off], the [Scan Viewer] window appears under the following
circumstances.
Scan operation did not properly finish.
Scan operation was canceled by pressing the [Cancel] button in the [Scanning] window.
When sending an e-mail with [Scan
Viewer] set to [On]
When sending an e-mail with [Scan
Viewer] set to [Off]