Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 226)

5.3 Logging in: Regular User Mode
226
5.3 Logging in: Regular User Mode
Depending on the authentication mode and the specified user name, the following
authentication process is performed for login authentication.
 For users registered in the LDAP server
Specify a user name from the user information registered with the LDAP server.
 When the [Server Type] of the LDAP server is [Active Directory] or [Active
Directory Global Catalog]
CAUTION
Do not move or shake the scanner when it is turned on.
This may damage components in the scanner and cause data to be
lost.
HINT
 The default user name and password for a regular user (guest account) are set as follows:
User name: guest
Password: guest
However, these cannot be used if the login setting for a guest account is disabled.
 Only one administrator or regular user can log in to the scanner at a time. Multiple persons
cannot log in at the same time.
User Name Format Authentication Process
SAM Account Name
Does not contain @ Authenticate the user login name
(sAMAccountName).
Example: user
User Principal Name
Contains @ Authenticate the user login name
(userPrincipalName).
Example: [email protected]
HINT
When specifying a SAM account name with a domain name, describe " domain_
name \ SAM_account_name ".