Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 359)

6.7 Calibrating the Touch Panel
359
6.7 Calibrating the Touch Panel
This should be done when the touch panel responses seem out of alignment with the
positions of objects on the screen.
1. On the administrator window, select [Calibrate Screen] under [Device
Test].
 The [Calibrate Screen] window appears.
2. Press the [Start] button.
 A red "+" (adjustment mark) appears.
3. Touch the "+" with your fingertip.
 Follow the instructions in the displayed window.
Touch
Panel
ATTENTION
The [Calibrate Screen] process takes about 40 seconds.
After being touched, the "+" will move to the next