Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 258)

5.6 Printing the Scanned Data
258
5.6.2 Positioning
Set the print position of the scanned data.
The setting selected here will be used every time the user prints a document.
1. On the [Print] window, press the [Positioning] button.
 The [Positioning] window appears.
2. Select the print positioning of the data.
Printing results will vary as shown below, depending on the scaling setting. For
more details on the scaling setting, refer to
"5.6.1 Scaling" (page 254) .
Button Scaling Control Point
Center Shrink to Fit Uses the center point of the area available for
printing as a control point.
Available Area
for Printing
Control Point
Center