Fujitsu Ricoh Fujitsu N7100E Network Image Scanner User Manual
Page 232
5.4 Sending the Scanned Data by e-Mail
232
5.4.1 Selecting an e-Mail Target from the e-Mail Address Book
The following explains how to use an e-mail address book to specify destinations when
sending an e-mail, instead of directly entering e-mail addresses with a keyboard.
The details to select e-mail addresses from an e-mail address book are described in
and
of
"5.4 Sending the Scanned Data by e-Mail" (page 229)
Type of the e-Mail Address Book
There are two types of e-mail address books, My List and LDAP List.
My List
This is an e-mail address book that can be created by the user.
LDAP List
This is an e-mail address book which uses all the data saved on the LDAP server.
The LDAP List cannot be edited.
The LDAP List cannot be used in the following cases, therefore the [LDAP List] tab
is not shown on the window.
If an LDAP server is not used
If logged in with the guest account
If logged in with a local account
e-Mail Targets that Can Be Selected from the e-Mail Address Book
When sending an e-mail, the following e-mail targets can be selected and entered from
the e-mail address book.
Yes: Available —: Unavailable
(*): Not shown in the LDAP List
The following explains how to select an e-mail address using the LDAP List.
HINT
My List can also be edited using User Editor. For details, refer to
e-Mail Target
Icon Shown in the
e-Mail Address Book
My List
LDAP List
Group
Yes
— (*)
Distribution List
Yes
— (*)
e-Mail Address
Yes
Yes