Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 103)

4.7 Configuring the Network Settings
103
4.7.4 Setting the NTP Server
Set the NTP server.
1. Select [NTP Server] under [Network Settings].
 The [NTP Server] window appears.
2. Enter the NTP server IP address, host name, or FQDN in the [Address]
input field.
3. Press the [Sync Time] button.
 The result of the time synchronization for the specified NTP server is shown.
Make sure that the time synchronization has been performed correctly.
4. Press the [OK] button on the confirmation window.
5. Press the [OK] button.
 The information entered is set.
Touch
Panel
Central Admin
Console
HINT
 The system time is automatically synchronized every 6 hours to the specified NTP server.
 After the setting is changed, the time synchronization is performed immediately.
 For the touch panel, if you do not perform any operations over the specified period set for the
logout wait time, the scanner logs out. For the Admin Tool, if you do not perform any
operations for 20 minutes or more, the session times out.