Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 324)

5.13 Processing a Job
324
5.13 Processing a Job
This section uses an example where buttons from [Job1] to [Job6] have been set.
1. On the [Job Menu] window, press a Job button.
 The Message Screen appears.
HINT
When the scanner account belongs to multiple job groups, the [Job Menu] windows can
be switched by using the job menu switch buttons on the [Job Menu List] window, which
appears when a list button is pressed.
HINT
 If either the title or message is not set in [Message Screen] on the [Job Details] window,
even when [Message Screen] is set to [On], the [Message Screen] will not be shown.
For details, refer to
Step 5 in "4.18.2 Setting a Job Sequence" (page 191) .
 If [Off] is selected for [Message Screen], scanning is started without showing the
[Message Screen], and the job is processed. For details, refer to
"5.13.1 Enabling/
Disabling the Message Screen" (page 326) .
 When [Message Screen] is disabled, whether or not the [Message Screen] is shown
depends on the settings configured by the administrator.