Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 374)

7.2 Network Connection Troubleshooting
374
■ Failure to Print on a Network Printer
If printing on a network printer which has been set in the scanner is not possible, try the
following steps. Also, read the printer manual beforehand that provides information about
how to set printer settings and how to add a network printer.
■ Action
Check if a network connection is possible by trying the same solution for "Failure to Connect to a
Server Using Its IP Address" (P.370) .
■ Action
Check whether or not the printer is ready for printing, deal with the cause of the error, and try
again.
■ Action
Contact the administrator to check if printing is allowed on the network printer.
■ Action
Try the following:
 Check that printing is possible from the print server application.
 Check that the print server spooling is operating normally.
■ Failure to Add a Network Folder
If adding a network folder from the scanner is not possible, try the following steps.
■ Action
Check the shared name on the server side.
■ Action
Check that the specified network folder path is correct.
■ Action
Set the LAN Manager authentication level to the same level as the server for the network folder.
Same as in "Failure to Connect to a Server Using Its IP Address" (P.370) .
Printer is not usable, due to an out of paper error, paper jam, or similar
problem.
Not authorized to print on network printer.
Printing is impossible due to a printer or spooler error.
Network folder shared name has been changed.
The specified network folder path is invalid.
The LAN Manager authentication level is not set to the same level as the
server for the network folder.