Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 453)

G.2 Configuring IPv6 Settings for the Scanner
453
G.2 Configuring IPv6 Settings for the Scanner
G.2.1 Installing the IPv6 Function
Install the IPv6 function in the following procedure:
■ Enabling the IPv6 Function
1. An administrator logs in to the scanner via the Admin Tool or the touch
panel.
For details, refer to "4.2 Administrator Login" (page 70) .
2. When using the touch panel, select [Advanced] for the setting mode on
the [Admin Menu] window.
For details, refer to "4.3.1 Configuring the Setting Mode" (page 75) .
3. On the [Network Advanced Settings] window under [Network Settings],
set the IPv6 function to [On].
For details, refer to "4.7.8 Configuring Network Advanced Settings" (page 107) .
■ Configuring an IPv6 Communication Environment
1. An administrator logs in to the scanner via the Admin Tool or the touch
panel.
For details, refer to "4.2 Administrator Login" (page 70) .
2. Configure the network settings.
3. After you have configured all items, press the [Logout] button.