Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 279)

5.8 Setting the Scan Options
279
5.8.5 Configuring Settings for a Carrier Sheet
To set whether or not to use a Carrier Sheet, follow the steps below.
When using a Carrier Sheet, set the size of the scanned document to be output.
1. Select [Carrier Sheet] under [Basic] on the scan settings window.
 The [Carrier Sheet] window appears.
2. If a Carrier Sheet is to be used, select the output size for the scanned
image.
3. Press the [OK] button.
 The information entered is set.