Fujitsu Ricoh Fujitsu N7100E Network Image Scanner - Manual (Page 276)

5.8 Setting the Scan Options
276
5.8.2 Setting Image Mode
To set an image mode (type) for the scanned document, follow the steps below.
You can set whether the document is scanned in "color", "grayscale" or "black & white".
1. Select [Image Mode] under [Basic] on the scan settings window.
 The [Image Mode] window appears.
2. Select the type of image to be output.
3. If [Automatic] is selected in Step 2 , specify [Sensitivity].
4. Press the [OK] button.
 The information entered is set.