PLANET WGS3-24000 - Manual (Page 91)

91
•
Other None of the following enumeration values.
•
Success The SNTP operation was successful and the system time was updated.
•
Request Timed Out A directed SNTP request timed out without receiving a response from the SNTP server.
•
Bad Date Encoded The time provided by the SNTP server is not valid.
•
Version Not Supported TheSNTP version supported by the server is not compatible with the version supported
by the client.
•
Server Unsychronized The SNTP server is not synchronized with its peers. This is indicated via the 'leap
indicator' field on the SNTP message.
•
Server Kiss Of Death The SNTP server indicated that no further queries were to be sent to this server. This is
indicated by a stratum field equal to 0 in a message received from a server.
。 Server IP Address - Specifies the IP address of the server for the last received valid packet. If no message has
been received from any server, an empty string is shown.
。 Address Type - Specifies the address type of the SNTP Server address for the last received valid packet.
。 Server Stratum - Specifies the claimed stratum of the server for the last received valid packet.
。 Reference Clock Id - Specifies the reference clock identifier of the server for the last received valid packet.
。 Server Mode - Specifies the mode of the server for the last received valid packet.
。 Unicast Sever Max Entries - Specifies the maximum number of unicast server entries that can be configured on
this client.
。 Unicast Server Current Entries - Specifies the number of current valid unicast server entries configured for this
client.
。 Broadcast Count - Specifies the number of unsolicited broadcast SNTP messages that have been received and
processed by the SNTP client since last reboot.
4.2.12.3 Server Configuration
Figure 4-2-61 SNTP Server Configuration
Configurable Data