PLANET WGS3-24000 - Manual (Page 184)

184
4.5.4.3 Diffserv Class Summary
This page shows the configuration summary of the Diffserv.
Figure 4-5-15 Diffserv Class Summary
Non-Configurable Data
。 Class Name - Displays names of the configured DiffServ classes.
。 Class Type - Displays types of the configured classes as 'all', 'any', or 'acl'. Class types are platform dependent.
。 Reference Class/ACL Number - Displays name of the configured class of type 'all' or 'any' referenced by the
specified class of the same type. For the specified class type of 'acl', the ACL number attached to the specified
class is displayed.
4.5.4.4 Diff Policy Configuration
This page is to configure the member class of the Diffserv policy.
Figure 4-5-16 DiffServ Policy Configuration
Selection Criteria
。 Policy Selector - Along with an option to create a new policy, this lists all the existing DiffServ policy names, from
which one can be selected. The content of this screen varies based on the selection of this field. If an existing
policy is selected then the screen will display Member Classes for that DiffServ policy. If 'create' is selected,
another screen appears to facilitate creation of a new policy. The default is 'create'.
。 Policy Type - This lists the DiffServ policy types from which one can be selected. Possible options are 'In' or 'Out'.
Policy type 'In' indicates the type is specific to inbound traffic direction and 'Out' indicates the type is specific to
outbound traffic direction. Only when a new policy is created, this field is a selector field. After policy creation this