PLANET WGS3-24000 User Manual
Page 118
118
Figure 4-3-22
IGMP Snooping VLAN Configuration
Configurable Data
。
VLAN ID
- Specifies list of VLAN IDs for which IGMP Snooping is enabled.
。
VLAN ID
- Appears when "New Entry" is selected in VLAN ID combo box. Specifies VLAN ID for which
pre-configurable Snooping parameters are to be set.
。
Admin Mode
- Enable Igmp Snooping for the specified VLAN ID.
。
Fast Leave Admin Mode
- Enable or disable the Igmp Snooping Fast Leave Mode for the specified VLAN ID.
。
Group Membership Interval
- Sets the value for group membership interval of IGMP Snooping for the specified
VLAN ID.
Valid range is (Maximum Response Time + 1) to 3600.
。
Maximum Response Time
- Sets the value for maximum response time of IGMP Snooping for the specified VLAN
ID.
Valid range is 1 to (Group Membership Interval - 1).
Its value should be greater than group membership interval value.
。
Multicast Router Expiry Time
- Sets the value for multicast router expiry time of IGMP Snooping for the specified
VLAN ID.
Valid range is 0 to 3600.
Command Buttons
。
Submit
- Update the switch with the values you entered.
。
Delete
- Update the switch with the default values.