PLANET WGS3-24000 - Manual (Page 483)

483
Split Horizon Mode None, simple or poison reverse.
Auto Summary Mode Enable or disable. If enabled, groups of adjacent routes are summarized into single
entries, in order to reduce the total number of entries The default is enable.
Host Routes Accept Mode Enable or disable. If enabled the router accepts host routes. The default is enable.
Global Route Changes The number of route changes made to the IP Route Database by RIP. This does not
include the refresh of a route's age.
Global queries The number of responses sent to RIP queries from other systems.
Default Metric Sets a default for the metric of redistributed routes.This field displays the default metric if
one has already been set or blank if not configured earlier. The valid values are (1 to 15)
Default Route Advertise The default route.
12.8.16 show ip rip interface brief
This command displays general information for each RIP interface. For this command to display successful results routing must
be enabled per interface (i.e. ip rip).
▫ Format show ip rip interface brief
▫ Modes Privileged EXEC
User EXEC
Interface Valid slot and port number separated by forward slashes.
IP Address The IP source address used by the specified RIP interface.
Send Version The RIP version(s) used when sending updates on the specified interface.
The types are none, RIP-1, RIP-1c, RIP-2.
Receive Version The RIP version(s) allowed when receiving updates from the specified interface.
The types are none, RIP-1, RIP-2, Both
RIP Mode RIP administrative mode of router RIP operation; enable activates, disable deactivates it.
Link State The mode of the interface (up or down).
12.8.17 show ip rip interface
This command displays information related to a particular RIP interface.