PLANET WGS3-24000 User Manual
Page 205
205
4.6.1.4 IP Interface Secondary Address Configuration
Figure 4-6-4
IP Interface Secondary Address Configuration
Selection Criteria
。
Secondary Address
- The IP Address for which data is to be displayed. Create must be selected to add a
secondary address to the interface.
Configurable Data
。
IP Address
- Enter the IP Address for the interface. This value is readonly once configured.
。
Subnet Mask
- Enter the subnet mask for the interface. This is also referred to as the subnet/network mask, and
defines the portion of the interface's IP Address that is used to identify the attached network. This value is readonly
once configured.
Non-Configurable Data
。
Slot/Port
- The interface for which data is to be displayed or configured.
。
Primary IP Address
- The Primary IP Address for the Interface.
Command Buttons
。
Submit
- Update the switch with the values on this screen. If you want the switch to retain the new values across a
power cycle, you must perform a save.
。
Delete
- Delete the IP Address from the interface.
。
Cancel
- Return to the IP Interface Configuration screen